Abstract
Prefabrikasyon ve Yapı Bilgi Modellemesi (BIM) entegrasyonu, inşaat sektöründe giderek artan bir şekilde uygulanmakta ve sektörün dijitalleşmesine önemli katkılar sağlamaktadır. Bu çalışmada, prefabrikasyon ve BIM entegrasyonuna yönelik literatürdeki durum bibliyometrik analiz yöntemiyle incelenmiştir. Web of Science veri tabanından elde edilen 426 yayın, VOSviewer yazılımı aracılığıyla analiz edilmiş ve haritalandırılmıştır. Prefabrikasyonun hız, maliyet tasarrufu, kalite kontrolü ve sürdürülebilirlik gibi avantajları ele alınırken BIM’in dijitalleşme ve disiplinler arası koordinasyon sağlama potansiyeli vurgulanmıştır. Analiz sonuçları; Çin, Avustralya ve İngiltere’nin bu alandaki bilimsel liderliğini ve Hong Kong Politeknik Üniversitesinin katkılarını ortaya koymuştur. Ayrıca, Automation in Construction dergisi en etkili yayın platformu olarak belirlenmiştir. En fazla iş birliği içinde olan yazar olarak ‘Li, Clyde Zhengdao’ öne çıkarken; en çok atıf alan yayın Hosseini vd., (2018), en yüksek bağlantı gücüne sahip yayın ise Yin vd., (2019) tarafından gerçekleştirilen makale olarak belirlenmiştir. Bu çalışma, BIM destekli prefabrikasyonun sektördeki yenilikçi uygulamaların yaygınlaşmasını destekleme ve gelecekteki araştırmalara yön verebilme potansiyeline sahip olduğunu göstermektedir.
Keywords
Yapı Bilgi Modellemesi Prefabrikasyon Prefabrike yapı Saha Dışı İnşaat Bibliyometrik Analiz
Ethical Statement
Bu araştırma, Düzce Üniversitesi Rektörlüğü Bilimsel Araştırma ve Yayın Etiği Kurulunun 25.04.2024 tarihli ve 2024/140 sayılı izin kararı ile gerçekleştirilmiştir.
References
- Abanda, F. H., Tah, J. H. M., & Cheung, F. K. T. (2017). BIM in off-site manufacturing for buildings. Journal of Building Engineering, 14, 89–102.
- Amani, A. ve Niyazi, A. Q. (2018). Türkiye’de prefabrike yapı sektörünün hızlı gelişimi. Mühendislik Bilimleri ve Tasarım Dergisi, 6(3), 487–494.
- Ay, I. ve Ayalp, G. (2021). Prefabrike yapıların tasarım, üretim, depolama, nakliye ve yapım süreçlerini etkileyen faktörler. Teknik Dergi, 32(3), 10907–10917. https://doi.org/10.18400/tekderg.647272
- Begić, H., & Galić, M. (2021). A systematic review of construction 4.0 in the context of the BIM 4.0 premise. Buildings, 11(8), 337. https://doi.org/10.3390/buildings11080337
- Dereli, A. B. (2024). Vosviewer ile Bibliyometrik Analiz. Communicata, (28), 1–7.
- Eastman, C., Teicholz, P., Sacks, R., & Liston, K. (2008). BIM handbook: A guide to building information modeling for owners, managers, designers, engineers and contractors. Wiley.
- Eser, L. (1960). Prefabrikasyon (Ana hatları). İTÜ Mimarlık Fakültesi.
- Eser, L. (1981). Yerinde yapım endüstrileşmiş yapı. İTÜ Mimarlık Fakültesi.
- Greenough, T., Smith, M., & Mariash, A. (2019). Integrating computational design to improve the design workflow of modular construction. Modular and Offsite Construction (Moc) Summit Proceedings, 165–172. https://doi.org/10.29173/mocs90
- Hahlbrock, D., Braun, M., Heidel, R., Lemmen, P., Boumann, R., Brückmann, T., Schramm, D., Helm, V., & Willmann, J. (2022). Cable robotic 3D-printing: Additive manufacturing on the construction site. Construction Robotics, 6(3–4), 305–318. https://doi.org/10.1007/s41693-022-00082-3
- Hosseini, M. R., Martek, I., Zavadskas, E. K., Aibinu, A. A., Arashpour, M., & Chileshe, N. (2018). Critical evaluation of off-site construction research: A scientometric analysis. Automation in Construction, 87, 235–247.
- Hwang, B. G., Shan, M., & Looi, K. Y. (2018). Key constraints and mitigation strategies for prefabricated prefinished volumetric construction. Journal of Cleaner Production, 183, 183–193.
- Jang, S., & Lee, G. (2018). Process, productivity, and economic analyses of BIM-based multi-trade prefabrication-A case study. Automation in Construction, 89, 86–98. https://doi.org/10.1016/j.autcon.2017.12.035
- Jin, R., Gao, S., Cheshmehzangi, A., & Aboagye-Nimo, E. (2018). A holistic review of off-site construction literature published between 2008 and 2018. Journal of Cleaner Production, 202, 1202–1219.
- Junjun, Z., Haining, W., & Hong, Z. (2021). Reflections on the development of prefabricated buildings in China from a historical and global perspective. In Towards implementation of sustainability concepts in developing countries (pp. 185–192). Springer.
- Kumar, B. (2015). A practical guide to adopting BIM in construction projects. Whittles Publishing.
- Lee, P., Lo, T., Wen, I., & Xie, L. (2022). The establishment of BIM‐embedded knowledge‐sharing platform and its learning community model: A case of prefabricated building design. Computer Applications in Engineering Education, 30(3), 863–875. https://doi.org/10.1002/cae.22490
- Li, C. Z., Hong, J., Xue, F., Shen, G. Q., Xu, X., & Luo, L. (2016). SWOT analysis and Internet of Things-enabled platform for prefabrication housing production in Hong Kong. Habitat International, 57, 74–87.
- Li, C. Z., Hong, J., Xue, F., Shen, G. Q., Xu, X., & Mok, M. K. (2016). Schedule risks in prefabrication housing production in Hong Kong: A social network analysis. Journal of Cleaner Production, 134, 482–494.
- Li, C. Z., Xue, F., Li, X., Hong, J., & Shen, G. Q. (2018). An Internet of Things-enabled BIM platform for on-site assembly services in prefabricated construction. Automation in Construction, 89, 146–161.
- Li, C. Z., Zhong, R. Y., Xue, F., Xu, G., Chen, K., Huang, G. G., & Shen, G. Q. (2017). Integrating RFID and BIM technologies for mitigating risks and improving schedule performance of prefabricated house construction. Journal of Cleaner Production, 165, 1048–1062.
- Li, X., Shen, G. Q., Wu, P., & Yue, T. (2019). Integrating building information modeling and prefabrication housing production. Automation in Construction, 100, 46–60.
- Li, X., Shen, G. Q., Wu, P., & Yue, T. (2019). Integrating building information modeling and prefabrication housing production. Automation in Construction, 100, 46–60. https://doi.org/10.1016/j.autcon.2018.12.024
- Matarneh, R., & Hamed, S. A. (2017). Exploring the adoption of Building Information Modeling (BIM) in the Jordanian construction industry. Journal of Civil & Environmental Engineering, 6(1), 1–6. https://doi.org/10.4172/2168-9717.1000189
- Mordor Intelligence. (2024). China prefabricated buildings industry market size. https://www.mordorintelligence.com/industry-reports/china-prefabricated-buildings-market
- Ninkov, A., Frank, J. R., & Maggio, L. A. (2022). Bibliometrics: Methods for studying academic publishing. Perspectives on Medical Education, 11(3), 173–176.
- Öztürk, O., Kocaman, R., & Kanbach, D. K. (2024). How to design bibliometric research: An overview and a framework proposal. Review of Managerial Science, 1–29. https://doi.org/10.1007/s11846-023-00642-0
- Shang, Z., Wang, F., & Yang, X. (2022). The efficiency of the Chinese prefabricated building industry and its influencing factors: An empirical study. Sustainability, 14(17), 10695.
- Sriyolja, Z., Harwin, N., & Yahya, K. (2021). Barriers to implement building information modeling (BIM) in construction industry: A critical review. IOP Conference Series: Earth and Environmental Science, 738(1), 012021. https://doi.org/10.1088/1755-1315/738/1/012021
- Stride, M., Hon, C. K. H., Liu, R., & Xia, B. (2020). The use of building information modelling by quantity surveyors in facilities management roles. Engineering, Construction and Architectural Management, 27(8), 1795–1812. https://doi.org/10.1108/ECAM-11-2019-0660
- Tan, T., Chen, K., Xue, F., & Lu, W. (2019). Barriers to building information modeling (BIM) implementation in China's prefabricated construction: An interpretive structural modeling (ISM) approach. Journal of Cleaner Production, 219, 949–959. https://doi.org/10.1016/j.jclepro.2019.02.141
- Wang, M., Wang, C. C., Sepasgozar, S., & Zlatanova, S. (2022). Building information modeling implementation in the design stage of Chinese prefabrication construction. IOP Conference Series: Earth and Environmental Science, 1101(9), 092017. https://doi.org/10.1088/1755-1315/1101/9/092017
- Wang, Y., & Wang, Y. (2021). Research on the integration of BIM technology in prefabricated buildings. World Journal of Engineering and Technology, 9(3), 579–588. https://doi.org/10.4236/wjet.2021.93040
- Wei, G. (2021). The application of BIM technology in design stage. E3S Web of Conferences, 252, 01047. https://doi.org/10.1051/e3sconf/202125201047
- Wen, Z., & Zhang, H. (2021). Research on cost management of prefabricated construction based on BIM. IOP Conference Series: Earth and Environmental Science, 768(1), 012110. https://doi.org/10.1088/1755-1315/768/1/012110
- Wettling, C., Mourgues, C., & Guindos, P. (2023). IDM for the conceptual evaluation process of industrialized timber projects. Advances in Civil Engineering, 2023, 1–17. https://doi.org/10.1155/2023/9200255
- Yin, X., Liu, H., Chen, Y., & Al-Hussein, M. (2019). Building information modelling for off-site construction: Review and future directions. Automation in Construction, 101, 72–91. https://doi.org/10.1016/j.autcon.2019.01.010
- Yönden, A. ve Önal, S. (2023). İnşaat muhasebesinin Türkiye muhasebe standartları açısından değerlendirilmesi. Özgür Yayınları. https://doi.org/10.58830/ozgur.pub209
- Zhong, R. Y., Peng, Y., Xue, F., Fang, J., Zou, W., Luo, H., Ng, S. T., Lu, W., Shen, G. Q. P., & Huang, G. Q. (2017). Prefabricated construction enabled by the Internet-of-Things. Automation in Construction, 76, 59–70. https://doi.org/10.1016/j.autcon.2017.01.006
- Zhu, J., Lin, C., & Zhu, X. X. (2018). Thoughts on informatization of prefabricated building. In IOP Conference Series: Materials Science and Engineering (Vol. 439, p. 032105). https://doi.org/10.1088/1757-899X/439/3/032105
Abstract
The integration of prefabrication and Building Information Modelling (BIM) is becoming increasingly prevalent in the construction industry, significantly contributing to its digital transformation. This study investigates the current state of the literature on prefabrication–BIM integration through a bibliometric analysis. A total of 426 publications retrieved from the Web of Science database were analyzed and mapped using the VOSviewer software. The analysis highlights the advantages of prefabrication—such as speed, cost savings, quality control, and sustainability—while also emphasizing BIM’s potential for digitalization and interdisciplinary coordination. The results reveal the scientific leadership of China, Australia, and the United Kingdom in this field, as well as notable contributions from the Hong Kong Polytechnic University. Automation in Construction has been identified as the most influential journal. ‘Li, Clyde Zhengdao’ emerged as the most collaborative author, while the most cited article was by Hosseini et al. (2018), and the publication with the highest total link strength was authored by Yin et al. (2019). The findings demonstrate that BIM-enabled prefabrication holds substantial potential to foster the dissemination of innovative practices in the construction sector and to guide future research.
Keywords
Building Information Modeling Prefabrication Prefabricated Construction Off-site construction Bibliometric Analysis
Ethical Statement
This study was conducted with the approval of the Düzce University Rectorate Scientific Research and Publication Ethics Committee, dated April 25, 2024, and numbered 2024/140.
References
- Abanda, F. H., Tah, J. H. M., & Cheung, F. K. T. (2017). BIM in off-site manufacturing for buildings. Journal of Building Engineering, 14, 89–102.
- Amani, A. ve Niyazi, A. Q. (2018). Türkiye’de prefabrike yapı sektörünün hızlı gelişimi. Mühendislik Bilimleri ve Tasarım Dergisi, 6(3), 487–494.
- Ay, I. ve Ayalp, G. (2021). Prefabrike yapıların tasarım, üretim, depolama, nakliye ve yapım süreçlerini etkileyen faktörler. Teknik Dergi, 32(3), 10907–10917. https://doi.org/10.18400/tekderg.647272
- Begić, H., & Galić, M. (2021). A systematic review of construction 4.0 in the context of the BIM 4.0 premise. Buildings, 11(8), 337. https://doi.org/10.3390/buildings11080337
- Dereli, A. B. (2024). Vosviewer ile Bibliyometrik Analiz. Communicata, (28), 1–7.
- Eastman, C., Teicholz, P., Sacks, R., & Liston, K. (2008). BIM handbook: A guide to building information modeling for owners, managers, designers, engineers and contractors. Wiley.
- Eser, L. (1960). Prefabrikasyon (Ana hatları). İTÜ Mimarlık Fakültesi.
- Eser, L. (1981). Yerinde yapım endüstrileşmiş yapı. İTÜ Mimarlık Fakültesi.
- Greenough, T., Smith, M., & Mariash, A. (2019). Integrating computational design to improve the design workflow of modular construction. Modular and Offsite Construction (Moc) Summit Proceedings, 165–172. https://doi.org/10.29173/mocs90
- Hahlbrock, D., Braun, M., Heidel, R., Lemmen, P., Boumann, R., Brückmann, T., Schramm, D., Helm, V., & Willmann, J. (2022). Cable robotic 3D-printing: Additive manufacturing on the construction site. Construction Robotics, 6(3–4), 305–318. https://doi.org/10.1007/s41693-022-00082-3
- Hosseini, M. R., Martek, I., Zavadskas, E. K., Aibinu, A. A., Arashpour, M., & Chileshe, N. (2018). Critical evaluation of off-site construction research: A scientometric analysis. Automation in Construction, 87, 235–247.
- Hwang, B. G., Shan, M., & Looi, K. Y. (2018). Key constraints and mitigation strategies for prefabricated prefinished volumetric construction. Journal of Cleaner Production, 183, 183–193.
- Jang, S., & Lee, G. (2018). Process, productivity, and economic analyses of BIM-based multi-trade prefabrication-A case study. Automation in Construction, 89, 86–98. https://doi.org/10.1016/j.autcon.2017.12.035
- Jin, R., Gao, S., Cheshmehzangi, A., & Aboagye-Nimo, E. (2018). A holistic review of off-site construction literature published between 2008 and 2018. Journal of Cleaner Production, 202, 1202–1219.
- Junjun, Z., Haining, W., & Hong, Z. (2021). Reflections on the development of prefabricated buildings in China from a historical and global perspective. In Towards implementation of sustainability concepts in developing countries (pp. 185–192). Springer.
- Kumar, B. (2015). A practical guide to adopting BIM in construction projects. Whittles Publishing.
- Lee, P., Lo, T., Wen, I., & Xie, L. (2022). The establishment of BIM‐embedded knowledge‐sharing platform and its learning community model: A case of prefabricated building design. Computer Applications in Engineering Education, 30(3), 863–875. https://doi.org/10.1002/cae.22490
- Li, C. Z., Hong, J., Xue, F., Shen, G. Q., Xu, X., & Luo, L. (2016). SWOT analysis and Internet of Things-enabled platform for prefabrication housing production in Hong Kong. Habitat International, 57, 74–87.
- Li, C. Z., Hong, J., Xue, F., Shen, G. Q., Xu, X., & Mok, M. K. (2016). Schedule risks in prefabrication housing production in Hong Kong: A social network analysis. Journal of Cleaner Production, 134, 482–494.
- Li, C. Z., Xue, F., Li, X., Hong, J., & Shen, G. Q. (2018). An Internet of Things-enabled BIM platform for on-site assembly services in prefabricated construction. Automation in Construction, 89, 146–161.
- Li, C. Z., Zhong, R. Y., Xue, F., Xu, G., Chen, K., Huang, G. G., & Shen, G. Q. (2017). Integrating RFID and BIM technologies for mitigating risks and improving schedule performance of prefabricated house construction. Journal of Cleaner Production, 165, 1048–1062.
- Li, X., Shen, G. Q., Wu, P., & Yue, T. (2019). Integrating building information modeling and prefabrication housing production. Automation in Construction, 100, 46–60.
- Li, X., Shen, G. Q., Wu, P., & Yue, T. (2019). Integrating building information modeling and prefabrication housing production. Automation in Construction, 100, 46–60. https://doi.org/10.1016/j.autcon.2018.12.024
- Matarneh, R., & Hamed, S. A. (2017). Exploring the adoption of Building Information Modeling (BIM) in the Jordanian construction industry. Journal of Civil & Environmental Engineering, 6(1), 1–6. https://doi.org/10.4172/2168-9717.1000189
- Mordor Intelligence. (2024). China prefabricated buildings industry market size. https://www.mordorintelligence.com/industry-reports/china-prefabricated-buildings-market
- Ninkov, A., Frank, J. R., & Maggio, L. A. (2022). Bibliometrics: Methods for studying academic publishing. Perspectives on Medical Education, 11(3), 173–176.
- Öztürk, O., Kocaman, R., & Kanbach, D. K. (2024). How to design bibliometric research: An overview and a framework proposal. Review of Managerial Science, 1–29. https://doi.org/10.1007/s11846-023-00642-0
- Shang, Z., Wang, F., & Yang, X. (2022). The efficiency of the Chinese prefabricated building industry and its influencing factors: An empirical study. Sustainability, 14(17), 10695.
- Sriyolja, Z., Harwin, N., & Yahya, K. (2021). Barriers to implement building information modeling (BIM) in construction industry: A critical review. IOP Conference Series: Earth and Environmental Science, 738(1), 012021. https://doi.org/10.1088/1755-1315/738/1/012021
- Stride, M., Hon, C. K. H., Liu, R., & Xia, B. (2020). The use of building information modelling by quantity surveyors in facilities management roles. Engineering, Construction and Architectural Management, 27(8), 1795–1812. https://doi.org/10.1108/ECAM-11-2019-0660
- Tan, T., Chen, K., Xue, F., & Lu, W. (2019). Barriers to building information modeling (BIM) implementation in China's prefabricated construction: An interpretive structural modeling (ISM) approach. Journal of Cleaner Production, 219, 949–959. https://doi.org/10.1016/j.jclepro.2019.02.141
- Wang, M., Wang, C. C., Sepasgozar, S., & Zlatanova, S. (2022). Building information modeling implementation in the design stage of Chinese prefabrication construction. IOP Conference Series: Earth and Environmental Science, 1101(9), 092017. https://doi.org/10.1088/1755-1315/1101/9/092017
- Wang, Y., & Wang, Y. (2021). Research on the integration of BIM technology in prefabricated buildings. World Journal of Engineering and Technology, 9(3), 579–588. https://doi.org/10.4236/wjet.2021.93040
- Wei, G. (2021). The application of BIM technology in design stage. E3S Web of Conferences, 252, 01047. https://doi.org/10.1051/e3sconf/202125201047
- Wen, Z., & Zhang, H. (2021). Research on cost management of prefabricated construction based on BIM. IOP Conference Series: Earth and Environmental Science, 768(1), 012110. https://doi.org/10.1088/1755-1315/768/1/012110
- Wettling, C., Mourgues, C., & Guindos, P. (2023). IDM for the conceptual evaluation process of industrialized timber projects. Advances in Civil Engineering, 2023, 1–17. https://doi.org/10.1155/2023/9200255
- Yin, X., Liu, H., Chen, Y., & Al-Hussein, M. (2019). Building information modelling for off-site construction: Review and future directions. Automation in Construction, 101, 72–91. https://doi.org/10.1016/j.autcon.2019.01.010
- Yönden, A. ve Önal, S. (2023). İnşaat muhasebesinin Türkiye muhasebe standartları açısından değerlendirilmesi. Özgür Yayınları. https://doi.org/10.58830/ozgur.pub209
- Zhong, R. Y., Peng, Y., Xue, F., Fang, J., Zou, W., Luo, H., Ng, S. T., Lu, W., Shen, G. Q. P., & Huang, G. Q. (2017). Prefabricated construction enabled by the Internet-of-Things. Automation in Construction, 76, 59–70. https://doi.org/10.1016/j.autcon.2017.01.006
- Zhu, J., Lin, C., & Zhu, X. X. (2018). Thoughts on informatization of prefabricated building. In IOP Conference Series: Materials Science and Engineering (Vol. 439, p. 032105). https://doi.org/10.1088/1757-899X/439/3/032105
Details
| Primary Language | Turkish |
|---|---|
| Subjects | Building Information Modelling and Management, Building Construction Management and Project Planning |
| Journal Section | Research Article |
| Authors | |
| Publication Date | June 25, 2025 |
| Submission Date | November 20, 2024 |
| Acceptance Date | January 17, 2025 |
| Published in Issue | Year 2025Volume: 8 Issue: 1 |
