Araştırma Makalesi
BibTex RIS Kaynak Göster

ENDÜSTRİYEL TABAN KÜLÜ ATIĞI İÇEREN KİL TUĞLA ÜRETİMİ

Yıl 2017, Cilt: 6 Sayı: 2, 483 - 491, 31.07.2017
https://doi.org/10.28948/ngumuh.341298

Öz

   Sanayi tesislerinde taban külü, kömürün
yanması ile ortaya çıkan endüstriyel bir artıktır. Söz konusu artığın kullanım
alanın çok kısıtlı olması nedeni ile çevresel bir sorun olarak güncelliğini
korumaktadır. Bu nedenle, kömür yakan tesislerde artık miktarının azaltılması ve
mevcut artıkların değerlendirilmesi için birçok araştırma yapılmaktadır.
Özellikle söz konusu artıkların yapı teknolojisinde kullanılabilirliği yönünde
ümit verici gelişmelerin olduğu bilinen bir gerçektir. Bu çalışmada; %20’ye
varan oranlarda yanmamış karbon içeren, Niğde Bor Şeker Fabrikasının taban
külünün tuğla üretiminde katkı maddesi olarak kullanılabilirliği
araştırılmıştır. Sonuçta, söz konusu taban külünün, tuğla üretiminde katkı
malzemesi olarak kullanılabileceği ve atığın değerlendirilmesinde iyi bir alternatif
olduğu belirlenmiştir.

Kaynakça

  • [1] CAIJUN, S., JUSHI, Q., “Increasing Coal Fly Ash Use in Cement and Concrete Through Chemical Activation of Reactivity of Fly Ash”, Energy Sources 25, 617-628, 2003.
  • [2] STULTZ, C.R., KITTO, J.B., Steam-Its Generation and Use, 40th ed. Babcock and Wilcox Company, Barberton, Ohio. pp 980, 1992.
  • [3] BORAN, M.G., Applicability of Cleaner Production Approach on Sugar Production and Environmental Impacts. MSc in Environmental Science, Ege University (Turkish), 2008.
  • [4] LUNA, Y., ARENAS, C.G., CORNEJO, A., LEIVA, C., VILCHES, L.F., “Recycling by-Products from Coal-Fired Power Stations into Different Construction Materials”, Int J Energy Environ Eng., 5, 387–397, 2014.
  • [5] NAGANATHAN, S., SUBRAMANIAM, N.K., MUSTAPHA, N.B., “Development of Brick Using Thermal Power Plant Bottom Ash and Fly ash”, Asıan Journal of Civil Engineering (Building And Housing), 13, 1, 2012.
  • [6] ŞAHBAZ, O., ÖTEYAKA, B., KELEBEK, S., UCAR, A., DEMIR, U., “Separation of Unburned Carbonaceous Matter in Bottom Ash Using Jameson Cell”, Separation and Purification Technology, 62, 103–109, 2008.

MANUFACTURE OF FIRED CLAY BRICKS CONTAINING AN INDUSTRIAL WASTE (BOTTOM ASH)

Yıl 2017, Cilt: 6 Sayı: 2, 483 - 491, 31.07.2017
https://doi.org/10.28948/ngumuh.341298

Öz

   Bottom ash is
an industrial waste produced by the combustion of coal in industrial plants.
These wastes are still under discussion as an environmental issue because of
the very restricted field of use. Therefore, numerous studies have been getting
performed to reduce the amount of wastes and to reuse the current residues
produced by the coal-powered plants. It is a known fact that, there are hopeful
developments on usability of industrial wastes in construction technology. In
this study, use of bottom ash-obtained at Bor Sugar Factory as by-product,
Niğde-Turkey, which contains unburned carbon by about 20% in production of
brick as an additive was investigated. The results showed that bottom ash could
be used as an additive in producing bricks and this process was found to be a
good alternative for recycling such wastes.

Kaynakça

  • [1] CAIJUN, S., JUSHI, Q., “Increasing Coal Fly Ash Use in Cement and Concrete Through Chemical Activation of Reactivity of Fly Ash”, Energy Sources 25, 617-628, 2003.
  • [2] STULTZ, C.R., KITTO, J.B., Steam-Its Generation and Use, 40th ed. Babcock and Wilcox Company, Barberton, Ohio. pp 980, 1992.
  • [3] BORAN, M.G., Applicability of Cleaner Production Approach on Sugar Production and Environmental Impacts. MSc in Environmental Science, Ege University (Turkish), 2008.
  • [4] LUNA, Y., ARENAS, C.G., CORNEJO, A., LEIVA, C., VILCHES, L.F., “Recycling by-Products from Coal-Fired Power Stations into Different Construction Materials”, Int J Energy Environ Eng., 5, 387–397, 2014.
  • [5] NAGANATHAN, S., SUBRAMANIAM, N.K., MUSTAPHA, N.B., “Development of Brick Using Thermal Power Plant Bottom Ash and Fly ash”, Asıan Journal of Civil Engineering (Building And Housing), 13, 1, 2012.
  • [6] ŞAHBAZ, O., ÖTEYAKA, B., KELEBEK, S., UCAR, A., DEMIR, U., “Separation of Unburned Carbonaceous Matter in Bottom Ash Using Jameson Cell”, Separation and Purification Technology, 62, 103–109, 2008.
Toplam 6 adet kaynakça vardır.

Ayrıntılar

Konular İnşaat Mühendisliği
Bölüm İnşaat Mühendisliği
Yazarlar

Ahmet Bilgil 0000-0002-4196-0484

Metin Uçurum Bu kişi benim 0000-0002-0725-9344

Mehmedi Vehbi Gökçe Bu kişi benim 0000-0002-3447-375X

Mustafa Fener Bu kişi benim

Ergün Yeşilyurt Bu kişi benim 0000-0003-2164-9063

Yayımlanma Tarihi 31 Temmuz 2017
Gönderilme Tarihi 30 Haziran 2016
Kabul Tarihi 24 Kasım 2016
Yayımlandığı Sayı Yıl 2017 Cilt: 6 Sayı: 2

Kaynak Göster

APA Bilgil, A., Uçurum, M., Gökçe, M. V., Fener, M., vd. (2017). ENDÜSTRİYEL TABAN KÜLÜ ATIĞI İÇEREN KİL TUĞLA ÜRETİMİ. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, 6(2), 483-491. https://doi.org/10.28948/ngumuh.341298
AMA Bilgil A, Uçurum M, Gökçe MV, Fener M, Yeşilyurt E. ENDÜSTRİYEL TABAN KÜLÜ ATIĞI İÇEREN KİL TUĞLA ÜRETİMİ. NÖHÜ Müh. Bilim. Derg. Temmuz 2017;6(2):483-491. doi:10.28948/ngumuh.341298
Chicago Bilgil, Ahmet, Metin Uçurum, Mehmedi Vehbi Gökçe, Mustafa Fener, ve Ergün Yeşilyurt. “ENDÜSTRİYEL TABAN KÜLÜ ATIĞI İÇEREN KİL TUĞLA ÜRETİMİ”. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi 6, sy. 2 (Temmuz 2017): 483-91. https://doi.org/10.28948/ngumuh.341298.
EndNote Bilgil A, Uçurum M, Gökçe MV, Fener M, Yeşilyurt E (01 Temmuz 2017) ENDÜSTRİYEL TABAN KÜLÜ ATIĞI İÇEREN KİL TUĞLA ÜRETİMİ. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi 6 2 483–491.
IEEE A. Bilgil, M. Uçurum, M. V. Gökçe, M. Fener, ve E. Yeşilyurt, “ENDÜSTRİYEL TABAN KÜLÜ ATIĞI İÇEREN KİL TUĞLA ÜRETİMİ”, NÖHÜ Müh. Bilim. Derg., c. 6, sy. 2, ss. 483–491, 2017, doi: 10.28948/ngumuh.341298.
ISNAD Bilgil, Ahmet vd. “ENDÜSTRİYEL TABAN KÜLÜ ATIĞI İÇEREN KİL TUĞLA ÜRETİMİ”. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi 6/2 (Temmuz 2017), 483-491. https://doi.org/10.28948/ngumuh.341298.
JAMA Bilgil A, Uçurum M, Gökçe MV, Fener M, Yeşilyurt E. ENDÜSTRİYEL TABAN KÜLÜ ATIĞI İÇEREN KİL TUĞLA ÜRETİMİ. NÖHÜ Müh. Bilim. Derg. 2017;6:483–491.
MLA Bilgil, Ahmet vd. “ENDÜSTRİYEL TABAN KÜLÜ ATIĞI İÇEREN KİL TUĞLA ÜRETİMİ”. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, c. 6, sy. 2, 2017, ss. 483-91, doi:10.28948/ngumuh.341298.
Vancouver Bilgil A, Uçurum M, Gökçe MV, Fener M, Yeşilyurt E. ENDÜSTRİYEL TABAN KÜLÜ ATIĞI İÇEREN KİL TUĞLA ÜRETİMİ. NÖHÜ Müh. Bilim. Derg. 2017;6(2):483-91.

download